I shared this Giant Boo Sign
last week on The Idea Room. Annnd since Halloween is in 3 days (Eek!) I thought I’d better hurry up & share it over here, too. You have just enough time to put one together. ha! Or better yet pin it for next year!
piece of plywood
1×2 board for trim pieces
paint (white, black & orange)
nail gun & nails
foam paint brush
wooden letters to spell BOO
First, I cut a piece of plywood 28 inches x 12 inches, and then cut 4 trim pieces using a 1×2 board (two are cut to 29 1/2 inches long and the shorter ones measure 13 1/4 inches long). Angle the ends to 45 degrees. Then I sanded everything really well, and then painted the trim black & the sign board white.
Once everything was dried. I used a nail gun to attach my frame.
I painted the BOO letters orange & used black vinyl cut into 1/4 inch strips to make stripes.
Flip your letter over, & then use an X-ACTO knife to trim off the excess.
Since this sign was going to go on my front porch.
I gave the letters a good coat of outdoor decoupage with a foam brush.
Next, I glued my letters on my board with wood glue. Let dry.
The last thing I did was add a few spooky vinyl bats! All done!
I made the Eek sign the exact same way that I made the BOO sign. I just painted my letters & added vinyl polka dots to the background. Too cute. The spider
is from Silhouette
(affiliate), & I stuck in on a scrap piece of lumber that I painted black. Easy peasy! Now I’m ready for Trick or Treaters. 🙂 Check out our front door!
Check out the Holiday Series
over on The Idea Room by clicking the picture below.
Enjoy! Have an amazing weekend! I’ll see you next week!
Thank you so much stopping by my blog!
If this is your first time visiting, I’d love to keep in touch.
This post was created for Ginger Snap Crafts by Ginger Bowie.